Input/Output
This section of the manual contains the information about external sensors/devices configuration. These devices are configured on the different ports available in Veronte Autopilot 1x:
| Port/Manager | Description |
|---|---|
| I/O Setup | Configuration of serial port connections, Serial Custom Messages, etc. |
| CAN Setup | Configuration of the two CAN buses (A and B), CAN Custom Messages and Mailboxes |
| Digital Input | Configuration of PPM signals, pulses or RPM sensors |
| Serial | Configurable Veronte LOS, RS232 and RS485 serial ports |
As Custom Messages need to be defined for both serial and CAN communication, there will be a specific section for this after the CAN Setup section Custom Messages types
© 2025 Embention. All rights reserved.